pkcell pkcell
  • Produits
    • Application
    • Battery Type
    Application
    • Surfboard
    • Power Tool
    • Golf cart
    • Ebike
    • Drone
    • Autres
    • 46.8V
    • 18v
    • 21.6v
    • 25.2v
    • 48v
    • 72v
    • 36v
    • 48v
    • 14.8v
    • 22.2v
    • 29.6v
    • 7.4v
    • 11.1v
    • 14.8v
    Battery Type
    • Special-Purpose Battery
    • Li-ion Battery Pack
    • Lithium Polymer
    • Lithium ion battery
    • 46.8V
    • 14.8v
    • 22.2v
    • 29.6v
    • 18v
    • 25.2v
    • 36v
    • 48v
    • 72v
    • 7.4v
    • 11.1v
    • 14.8v
    view all series
  • Solutions
    Consumer Electronics Battery
    Batterie grand public
    • Electric surfboard
    • Ebike
    • Outil électrique
    • Batterie d'aspirateur
    Medical Device Battery
    Solutions d'alimentation électrique pour le secteur médical
    • Batterie de pompe à perfusion
    • Générateur d'oxygène Batterie
    Motive Power Battery
    Solutions de puissance motrice
    • Drone
    • Batterie de tondeuse à gazon
    • Batterie marine
    • Batterie AGV
    • Pallet Jacks Battery
    • Batterie de l'équipement de soutien au sol (GSE)
    Lead to lithium Battery
    Solutions d'alimentation du plomb au lithium
    • Scooter d'équilibre
    • Voiturette de golf
    • Laveuse de sol
    • Batterie pour chariot élévateur à fourche
    Industrial Power Battery
    Solutions d'alimentation industrielle
    • Batterie AGV
    • Pallet Jacks Battery
    • Batterie de l'équipement de soutien au sol (GSE)
  • Service
  • A propos de
  • Actualités
  • Cas
    • img-25
      Par Solutions
    • img-26
      Par application
  • FAQ
  • Langue
    FR
    FR EN ES RU DE IT PT KO ZH ZH_TW
FR
FR EN ES RU DE IT PT KO ZH ZH_TW
DEMANDE DE PRIX

Déposer une demande de consultation gratuite

Envoyez-nous une note pour vous connecter
avec nos équipes.
Veuillez nous contacter à l'aide du formulaire ci-contre. Notre service clientèle vous contactera vous contactera après avoir reçu votre demande.
  • Electric surfboard
  • Drone
  • Ebike
  • Outil électrique
  • Batterie de tondeuse à gazon
  • Batterie marine
  • Scooter d'équilibre
  • Voiturette de golf
  • Laveuse de sol
  • Batterie pour chariot élévateur à fourche
  • Batterie d'aspirateur
  • Batterie AGV
  • Pallet Jacks Battery
  • Batterie de pompe à perfusion
  • Générateur d'oxygène Batterie
  • Batterie de l'équipement de soutien au sol (GSE)
  • Accueil
  • Cas
  • Electric surfboard
Lithium ion Battery

Electric surfboard

Partager

Surfboard Battery Needs Analysis Content

Based on the synthesis of customer feedback and fleet operational logs, the following technical requirements for the battery energy storage system (BESS) are derived. These requirements shift the focus from simple energy density to power stability, speed, and thermal resilience.

Surfboard Battery Needs Analysis Content

Based on the synthesis of customer feedback and fleet operational logs, the following technical requirements for the battery energy storage system (BESS) are derived. These requirements shift the focus from simple energy density to power stability, speed, and thermal resilience.

2.1. Sustained Power and Runtime Requirement

  • Problem: The current battery fails to sustain the required peak power draw through the last quarter of its state of charge (SOC).
  • Technical Need: The battery must guarantee a 60-minute sustained operational window at a minimum average discharge rate of 50Ah.

     This necessitates

  1. Voltage Stability: Minimizing voltage sag under high load, especially below 20% SOC.
  2. Usable Capacity Increase: A volumetric increase in capacity to ensure 60 minutes of total run time, but critically, the cells must tolerate a higher continuous C-rate across the entire discharge curve.

2.2. Fleet Turnover Charging Requirement

  • Problem: The 4-5 hour charge time (0% to 100%) prevents rapid fleet cycling necessary to meet afternoon demand.
  • Technical Need: Implementation of a High-Rate Charging Protocol to achieve a 20% à 80% SOC recharge in less than 60 minutes.

2.3. Thermal Management and Safety Requirement

  • Problem: Heat buildup during discharge and subsequent charging in hot climates triggers protective shutdowns and slows charging.
  • Technical Need: Integration of an Active Thermal Management System (ATMS) to ensure cell temperatures remain within the optimal operating window (0∘C−45∘C). This requires:

 

Application Case Outcome

By addressing the core technical requirements identified in the needs analysis, the electric surfboard transitions from a niche product to a high-utility B2B asset, enabling a powerful value proposition:

Old Product Limitation New Product Solution (Enabled by BESS) Value to B2B Customer
Low Utilization (1-2 trips/day) 60-minute turnover time 100% Increase in Daily Capacity: Boards can now complete 3-4 cycles per day, significantly boosting revenue per asset.
Unreliable Runtime (30 mins usable) Guaranteed 60-minute sustained performance Premium Service Delivery: Eliminates range anxiety and lesson refunds, protecting brand reputation and allowing for reliable pricing structures.
Safety Concerns (Overheating) Active Thermal Management System (ATMS) Predictable Operations & Longevity: Ensures the fleet remains operational during peak heat hours and drastically extends the useful cycle life of the expensive battery packs.

 

Customer mention

Customer review for surfboard battery

Prévenir
Liste
Suivant

Affaires connexes

  • forklift

    Batterie pour chariot élévateur à fourche

    PowerLift Industries, créée en 2015, est ...

  • marine-battery-list-01

    Batterie marine

    OceanTech Yachts, fondée en 2018, est une première ...

  • GSE

    Batterie GSE

    AeroTech Services, créée en 2015, est une ...

Prêt
DEMANDER UN DEVIS

Obtenir un devis
  • Nouvelles et blogs
  • FAQ
  • A propos de
  • Étude de cas
  • Service
Solutions
  • Ebike
  • Outil électrique
  • Drone
  • Voiturette de golf
Nous contacter

Courriel : info@pkcell.com

Téléphone : +86 13925223326

 

Adresse :

9th Floor , Block B, Hongrongyuan North Station Center, No. 328, Mintang Road, Longhua District, Shenzhen,China,518110

Copyright © 2025 Shenzhen Pkcell Battery Co., Ltd. All Rights Reserved.
Haut de page