pkcell pkcell
  • Products
    • Application
    • Battery Type
    Application
    • Surfboard
    • Power Tool
    • Golf cart
    • Ebike
    • Drone
    • Others
    • 46.8V
    • 18v
    • 21.6v
    • 25.2v
    • 48v
    • 72v
    • 36v
    • 48v
    • 14.8v
    • 22.2v
    • 29.6v
    • 7.4v
    • 11.1v
    • 14.8v
    Battery Type
    • Special-Purpose Battery
    • Li-ion Battery Pack
    • Lithium Polymer
    • Lithium ion battery
    • 46.8V
    • 14.8v
    • 22.2v
    • 29.6v
    • 18v
    • 25.2v
    • 36v
    • 48v
    • 72v
    • 7.4v
    • 11.1v
    • 14.8v
    view all series
  • Solutions
    Consumer Electronics Battery
    Consumer Battery
    • Electric surfboard
    • Ebike
    • Electric Tool
    • Vacuum Cleaner Battery
    Medical Device Battery
    Medical Power Solutions
    • Infusion Pump Battery
    • Oxygen Generator Battery
    Motive Power Battery
    Motive Power Solutions
    • Drone
    • Lawn Mower Battery
    • Marine Battery
    • AGV Battery
    • Pallet Jacks Battery
    • Ground Support Equipment (GSE) Battery
    Lead to lithium Battery
    Lead-to-Lithium Power solutions
    • Balance Scooter
    • Golf Cart
    • Floor Scrubber
    • Forklift Battery
    Industrial Power Battery
    Industrial Power Solutions
    • AGV Battery
    • Pallet Jacks Battery
    • Ground Support Equipment (GSE) Battery
  • Service
  • About
  • News
  • Case
    • img-25
      By Solutions
    • img-26
      By Applicaiton
  • FAQ
  • Language
    EN
    EN ES RU DE FR IT PT KO ZH ZH_TW
EN
EN ES RU DE FR IT PT KO ZH ZH_TW
RFQ

Leave a request for a freeconsultation

Send us a note to connect
with our teams.
Please contact us through the form on the right. Our customer service staff will contact you after receiving the inquiry.
  • Electric surfboard
  • Drone
  • Ebike
  • Electric Tool
  • Lawn Mower Battery
  • Marine Battery
  • Balance Scooter
  • Golf Cart
  • Floor Scrubber
  • Forklift Battery
  • Vacuum Cleaner Battery
  • AGV Battery
  • Pallet Jacks Battery
  • Infusion Pump Battery
  • Oxygen Generator Battery
  • Ground Support Equipment (GSE) Battery
  • Home
  • Case
  • Electric surfboard
Lithium ion Battery

Electric surfboard

Share

Surfboard Battery Needs Analysis Content

Based on the synthesis of customer feedback and fleet operational logs, the following technical requirements for the battery energy storage system (BESS) are derived. These requirements shift the focus from simple energy density to power stability, speed, and thermal resilience.

Surfboard Battery Needs Analysis Content

Based on the synthesis of customer feedback and fleet operational logs, the following technical requirements for the battery energy storage system (BESS) are derived. These requirements shift the focus from simple energy density to power stability, speed, and thermal resilience.

2.1. Sustained Power and Runtime Requirement

  • Problem: The current battery fails to sustain the required peak power draw through the last quarter of its state of charge (SOC).
  • Technical Need: The battery must guarantee a 60-minute sustained operational window at a minimum average discharge rate of 50Ah.

     This necessitates

  1. Voltage Stability: Minimizing voltage sag under high load, especially below 20% SOC.
  2. Usable Capacity Increase: A volumetric increase in capacity to ensure 60 minutes of total run time, but critically, the cells must tolerate a higher continuous C-rate across the entire discharge curve.

2.2. Fleet Turnover Charging Requirement

  • Problem: The 4-5 hour charge time (0% to 100%) prevents rapid fleet cycling necessary to meet afternoon demand.
  • Technical Need: Implementation of a High-Rate Charging Protocol to achieve a 20% to 80% SOC recharge in less than 60 minutes.

2.3. Thermal Management and Safety Requirement

  • Problem: Heat buildup during discharge and subsequent charging in hot climates triggers protective shutdowns and slows charging.
  • Technical Need: Integration of an Active Thermal Management System (ATMS) to ensure cell temperatures remain within the optimal operating window (0∘C−45∘C). This requires:

 

Application Case Outcome

By addressing the core technical requirements identified in the needs analysis, the electric surfboard transitions from a niche product to a high-utility B2B asset, enabling a powerful value proposition:

Old Product Limitation New Product Solution (Enabled by BESS) Value to B2B Customer
Low Utilization (1-2 trips/day) 60-minute turnover time 100% Increase in Daily Capacity: Boards can now complete 3-4 cycles per day, significantly boosting revenue per asset.
Unreliable Runtime (30 mins usable) Guaranteed 60-minute sustained performance Premium Service Delivery: Eliminates range anxiety and lesson refunds, protecting brand reputation and allowing for reliable pricing structures.
Safety Concerns (Overheating) Active Thermal Management System (ATMS) Predictable Operations & Longevity: Ensures the fleet remains operational during peak heat hours and drastically extends the useful cycle life of the expensive battery packs.

 

Customer mention

Customer review for surfboard battery

Prev
List
Next

Related Cases

  • Dust Collector

    Vacuum Cleaner Battery

    CleanSweep Technologies, founded in 2019, is ...

  • Pallet Jacks

    Pallet Jacks Battery

    PowerLift Logistics, founded in 2018, is a dy ...

  • GSE

    GSE Battery

    AeroTech Services, established in 2015, is a ...

Ready
GET A QUOTE

Get A Quote
  • News & Blogs
  • FAQ
  • About
  • Case Study
  • Service
Solutions
  • Ebike
  • Electric Tool
  • Drone
  • Golf Cart
Contact Us

Email : info@pkcell.com

Phone: +86 13925223326

 

Address:

9th Floor , Block B, Hongrongyuan North Station Center, No. 328, Mintang Road, Longhua District, Shenzhen,China,518110

Copyright © 2025 Shenzhen Pkcell Battery Co., Ltd. All Rights Reserved.
Back to top